INDUSTRIAL & MANUFACTURING
DISTRIBUTION & WAREHOUSE FACILITIES
MANUFACTURING FACILITIES
LOW TEMPERATURE FACILITIES
AGRO MERCHANTS GROUP
(NORDIC)
COLD STORAGE
Pooler, GA
TDG was selected by ARCO Design Build to provide architectural and structural engineering services for the new 170,268 SF Blast Freeze and Distribution Center. The building has an office of approximately 4,100 SF, 16,500 SF (-20°) quick freeze chambers, a 77,000 SF (-10°) freezer, an 18,000 SF (34°) dry dock, a 14,000 SF (34°) wet dock, 7,400 SF (0°) de-space, machine room and other support spaces. The building has a clear height of 55’ with insulated metal walls and conventional steel frame.
SERVICES: Architecture, Structural Engineering
SIZE: 341,750 SF
SCOPE: New construction
DETAILS:
-
170,250 SF Phase I area
-
Blast freezer w/penthouse cooling
-
Central ammonia refrigeration
-
IMP exterior walls
-
Multiple storage rooms
-
Convertible storage room
-
MHE maintenance and charging
-
171,500 SF Phase II area
-
48’ warehouse clear height
-
Blast freezer w/penthouse cooling
-
Central ammonia refrigeration
-
IMP exterior walls
-
Multiple storage rooms
-
Design-build project delivery








ALCAN PACKAGING
Reidsville, NC
Architectural, Civil Engineering and Structural Engineering design services through Samet Corporation for the 240,423 SF building for Alcan’s new packaging facility in Reidsville, North Carolina. The building is conventional steel frame construction with precast concrete wall panels. The ground floor is 211,761 SF and houses production areas as well as an office area and a cafeteria. The 28,662 sf mezzanine houses mechanical and electrical rooms as well as storage and office space.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 240,423 SF
SCOPE: New construction
DETAILS:
-
Conventional steel frame
-
Precast wall panels
ARDAGH
Winston-Salem, NC
TDG provided architectural and structural engineering design services for the new distribution center for Ardagh Metal Packaging in Winston-Salem, NC. Ardagh Group is a Louxembourg based global supplier for sustainable packaging solutions.
SERVICES: ARCH | STRUCT
SIZE: 609,750 sf
SCOPE: New construction
DETAILS:
-
+/- 4,250 SF office
-
Load bearing concrete tilt-wall panels
-
32' clear height
-
+/- 603,780 SF warehouse






ASCO POWER
TECHNOLOGIES
Welcome, NC
ASCO Power Technologies was founded in 1888 as an automatic transfer switch company. The TDG designed manufacturing plant featured renovations to the existing facility and a new addition to accommodate corporate offices and additional manufacturing space.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 285,665 SF
SCOPE: Renovation & Addition
DETAILS:
-
Existing: 145,300 SF
-
Addition: 140,365 SF
-
52,000 SF of corporate office space
-
14,000 SF paint line
-
Design-build project delivery
AUTOMATION DIRECT
WAREHOUSE W
Cumming, GA
Architectural and Structural Engineering design services for a new distribution warehouse for Automation Direct, a full scale e-commerce distribution center.
SERVICES: Architecture, Structural Engineering
SIZE: 171,105 SF
SCOPE: New Construction
DETAILS:
-
+/-14,524 SF office space
-
43' warehouse clear height
-
+/-126,000 sf warehouse
-
Precast concrete walls








BUNZL (UCIC)
Winston-Salem, NC
TDG provided design services for the new 200,000 SF distribution center for BUNZL Distribution USA, LLC. BUNZL Distribution is the largest division of BUNZL, PLC an international distribution and outsourcing group based in London. BUNZL is located within the Union Cross Industrial Center, UCIC.
SERVICES: Architecture, Structural Engineering
SIZE: 200,000 SF
SCOPE: New Construction
DETAILS:
-
50,0000 SF expandable footprint
-
32' clear height
-
192,000 SF of warehouse
-
Load bearing tilt-up concrete walls
BURRIS LOGISTICS
COLD STORAGE
McDonough, GA
TDG provided Structural Engineering services for the Burris Logistics Cold Storage Facility. The warehouse was design-built with an expandable footprint to allow future growth. The office portion is a two-story tilt-up building.
SERVICES: Structural Engineering
SIZE: 252,775 SF
SCOPE: New Construction
DETAILS:
-
Two-story office
-
41’ warehouse clear height
-
Four storage rooms
-
Rooftop packaged refrigeration
-
IMP exterior walls at storage
-
Thermomass tilt-up at cold dock
-
Tilt-up at office & MHE
-
Expandable building design
-
Design-build project delivery








CAMBRO MANUFACTURING
Mebane, NC
Cambro Manufacturing is a family owned manufacturing company founded in 1951 that once offered a single product. Cambro now offers over 14,000 food & beverage products. TDG provided design services for their new manufacturing and distribution center in Mebane, North Carolina.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 487,200 SF
SCOPE: New construction
DETAILS:
-
Phase I: 232,599 SF
-
Phase II: 254,601 SF
-
Injection molding and product distribution
CENTRAL CAROLINA ENTERPRISE PARK
Sanford, NC
CCEP is a multi lot industrial park on approximately 750 acres adjacent to US 1 Freeway and the Colon Road exit in Sanford, North Carolina. The buildings are designed with concrete tilt-up wall panels with 26 foot clear height.
SERVICES: ARCH | STRUCT
SIZE: 9 Lots | +/- 117,000 SF per building
SCOPE: New construction
DETAILS:
-
Industrial manufacturing / warehouse space
-
26' clear height








COCA-COLA BOTTLING
Greensboro, NC
Greensboro, NC
Coca-Cola Consolidated is the largest Coca-Cola bottler in the United States with headquarters based out of Charlotte, North Carolina. TDG designed the McConnell Center Shell Building and was retained to design and permit a new distribution facility for Coca-Cola in Greensboro, North Carolina.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 135,450 SF
SCOPE: New construction
DETAILS:
-
McConnell Center Building I
-
Sales and accounting office
-
Product distribution & fleet maintenance
-
Expandable building footprint
COLUMBIANA HI TEC
(ORANO TN)
Kernersville NC
TDG designed the building originally for Columbiana Hi Tech, a custom manufacturing and fabrication facility located in Kernersville, North Carolina. The project has an expandable footprint to accommodate future growth. In 2018, TDG was contracted to design a new 32,000 SF addition.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 100,000 SF
SCOPE: New construction & Addition
DETAILS:
-
Expandable footprint
-
Two 40 ton cranes and two 20 ton cranes supported by steel structures
-
Office with a mezzanine for future growth
-
Design-build project delivery








DAIRY FRESH
Winston-Salem, NC
TDG provided architectural and engineering services for a new 7,200 sf. refrigerated warehouse and a 280 l.f. elevated refrigerated walkway for the Dairy Fresh location in Winston Salem. The company manufactures milk, ice-cream products, and hard frozen yogurt. The project included demolition of an existing pre-engineered warehouse, renovation of a dry storage warehouse, the design of three docks for the refrigerated warehouse and one for the existing dry storage warehouse.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 7,200 SF
SCOPE: Renovation and Addition
DETAILS:
-
7,200 SF milk shipping building
-
280 LF refrigerated milk conveyor bridge
-
Renovations at existing dry storage
-
IMP exterior walls
-
Design preserved existing cold dock
-
Design-build project delivery
DAVIE INDUSTRIAL BUILDING I
Mocksville, NC
Architectural, Civil Engineering, and Structural design services for a industrial shell building in Mocksville, North Carolina. Currently TDG is working on the tenant upfit for a national pool equipment company's new distribution center including approximately 13,000 SF of office space.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 324,000 SF
SCOPE: New construction
DETAILS:
-
Conventional steel framing
-
Exterior insulated precast wall panels








ENERGIZER BATTERY
Asheboro, NC
Architectural, Civil Engineering, and Structural design services for a new manufacturing facility in Asheboro, North Carolina. The scope of work included renovations to the existing facility and a new addition.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 96,382 SF
SCOPE: Renovation and Addition
DETAILS:
-
Conventional steel framing
-
Exterior insulated precast wall panels




FERRARO FOODS
Mebane, NC
Architectural, Civil and Structural Engineering services for the new 699,630 SF frozen, cold food and dry goods storage and distribution facility in Mebane, North Carolina.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 699,630 SF
SCOPE: New construction
DETAILS:
-
Dry goods, refrigerated & frozen storage
-
Box in a box low temp rooms
-
Two story internal office
-
Insulated precast concrete walls
-
Expandable building design
-
Design-build project delivery




FFF ENTERPRISES
Kernersville, NC
Design services for the main east coast distribution facility for FFF Enterprises, a pharmaceutical distributor. They are one of the largest distributor's of the influenza vaccine.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 88,978 SF
SCOPE: New construction
DETAILS:
-
Insulated precast exterior walls
-
Warehouse HVAC maintains constant 68 degrees to preserve FFF vaccines
-
Design-build project delivery




FIBERTEX
PERSONAL CARE
Asheboro, NC
New print facility for Fibertex Personal Care, the Danish based company specializing in nonwoven and printed nonwoven fabrics for the hygiene industry.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 70,010 SF
SCOPE: New construction
DETAILS:
-
Office and manufacturing center
-
Locker rooms
-
Materials mezzanine
-
Print / Fabrication room
-
Finished goods warehouse




FORD HVC
DISTRIBUTION CENTER
Mebane, NC
Architectural, Interior design, Civil Engineering and Structural engineering on the First Industrial/Arco Design-Build team for the 252,000 SF office distribution center for Ford Motor Company in Mebane, North Carolina. The building is located on a 20.94 acre site in the North Carolina Industrial Center and is configured for a future expansion with rail service. The conventional steel frame structure has load bearing concrete tilt-wall panel walls. There is 11,000 SF of internal office space.
SERVICES: Architecture, Civil Engineering, Structural Engineering, Interiors
SIZE: 252,000 SF
SCOPE: New construction
DETAILS:
-
High volume parts distribution
-
Load bearing tilt-up wall panels




GATEWAY SPECULATIVE
Santee, SC
Architectural design services for a 120,000 SF warehouse building in Santee, South Carolina. The building is the first designed within a larger industrial park.
SERVICES: Architecture
SIZE: 124,695 SF
SCOPE: Shell warehouse building
DETAILS:
-
34’ warehouse clear height
-
Multi-tenant building design




GREAT LAKES
COLD STORAGE
Solon, OH
Structural design for an additional 57,300 SF cold storage warehouse to expand their existing facility.
SERVICES: Structural Engineering
SIZE: 57,300 SF
SCOPE: Addition
DETAILS:
-
2,000 SF cold dock
-
38,000 SF -20° freezer
-
40’ warehouse clear height
-
Rooftop packaged refrigeration
-
IMP exterior walls
-
Design-build project delivery



GREENLEA
Greensboro, NC
Design services for new shell warehouse building in Greensboro, NC. TDG is currently working on a tenant upfit to accommodate office and warehouse function for a user taking approximately 118,000 SF.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 217,620 SF
SCOPE: New construction & Upfit
DETAILS:
-
Speculative Industrial shell building
-
30' clear height
-
Tilt-up concrete panel design




HUTT LOGISTICS
Hudsonville, MI
Hutt Logistics is a transportation, logistics, and warehousing service provider. TDG provided structural engineering services for their 80,700 SF addition. There was an existing pipe bridge that had to be encapsulated within the addition.
SERVICES: Structural Engineering
SIZE: 80,700 SF
SCOPE: Addition
DETAILS:
-
Snow bay to support drift loads
-
Existing pipe bridge through building
-
8,100 SF cold dock
-
72,600 SF -20 degree freezer
-
44’ warehouse clear height
-
Central ammonia refrigeration
-
IMP exterior walls
-
Design-build project delivery
INTERNATIONAL LOGISTICS PARK
Leland, NC
Architectural and Structural Engineering design services for a speculative industrial building located in Leland, North Carolina. The overall site was designed to accommodate four buildings. Building One was designed to accommodate flexibility for multiple tenants and a variety of use types.
SERVICES: ARCH | STRUCT
SIZE: 151,100 sf
SCOPE: New construction
DETAILS:
-
1,000 AC site with up to 1,200,000 SF
-
Four speculative buildings
-
Insulated precast concrete wall panels







JBS FOODS
(VANTAGE)
Lenoir, NC
Architectural, Civil and Structural Engineering services for the 78,000 SF case ready meat processing facility in Lenoir, North Carolina. The building houses the office and production operations for the plant. TDG was retained to provide Architectural, Civil and Structural Engineering services for an 84,000 SF addition.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 70,000 SF & 8
SCOPE: Addition
DETAILS Addition 1:
-
USDA compliant GMP packaging room
-
Separate receiving & shipping cold docks
-
IMP exterior walls
-
Two story internal office
-
Central ammonia refrigeration
-
Design-build project delivery



LIBERTY HARDWARE
Winston-Salem, NC
TDG was the architect, interior designer, structural and civil engineer for the 681,472 SF office / distribution center for Liberty Hardware in Winston-Salem, North Carolina. The building is located on a 44.685 acre site in the Union Cross Business Park. The building contains a two story office of 41,500 SF, a warehouse of approximately 600,000 SF and a 40,000 SF mezzanine. The warehouse was a pre-engineered frame with a standing seam metal roof. The office area was conventional steel frame. The site has 524 parking spaces.
SERVICES: Architecture, Civil Engineering, Structural Engineering, Interiors
SIZE: 681,472 SF
SCOPE: New construction
DETAILS:
-
Corporate office for cabinet hardware distribution company
-
Load bearing tilt-up wall panels



LIBERTY POINT INDUSTRIAL PARK
Fayetteville, NC
TDG was the architect and structural engineer for the 178,200 SF office / distribution center for the Liberty Point Industrial Park in Fayetteville, North Carolina. The site is located adjacent to Interstate 95 and is home to a United States Postal Service distribution warehouse.
SERVICES: Architecture, Structural Engineering
SIZE: 178,200 SF
SCOPE: New construction
DETAILS:
-
USPS distribution facility
-
Insulated precast concrete wall panels




MCCONNELL SITE
Greensboro, NC
TDG provided Architectural, Structural, and Civil Engineering services for the master planned McConnell site buildings and subsequent upfits. Located directly off Interstate 40, the site is 25.62 acres Greensboro, North Carolina. The shell buildings were designed as conventional steel frame and insulated precast exterior wall panels.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 429,000 SF
SCOPE: New construction
DETAILS:
-
Phase 1: 300,000 SF
-
Phase 2: 129,000 SF
-
Multi tenant manufacturing distribution facility
-
Insulated pre-cast exterior walls
-
Design-build project delivery




MEADOWS CORPORATE PARK
Concord, NC
Class A industrial facility adjacent to Interstate 85 in Concord just north of Charlotte, North Carolina. TDG provided Architectural and Structural Engineering design services for both shell buildings. We were also retained to design and permit the upfits. Currently the building has locations for Mitsubishi, KW, Red Rover, and State Electric. The final two tenant spaces are leased and under construction. Building II is under construction and leased as a single tenant space.
SERVICES: Architecture, Structural Engineering
SIZE: 192,148 SF
SCOPE: New construction
DETAILS:
-
Phase I: 112,000 SF
-
Phase II: 80,148 SF
-
The site is located just north of downtown Charlotte
-
Tilt-up wall panels
-
30' clear height




NORTH CAROLINA
INDUSTRIAL CENTER LOT 15
Mebane, NC
TDG provided Architectural, Civil and Structural Engineering services for the 134,469 SF shell building. Located on an 8.8 acre site in the North Carolina Industrial Center, a TDG master planned industrial site. The building exterior is insulated precast concrete panels with a membrane roof.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 134,469 SF
SCOPE: New construction
DETAILS:
-
Insulated precast panels




NYPRO
Mebane, NC
Architectural, Civil and Structural Engineering services for this new 113,110 SF manufacturing facility. The project included 13,560 SF of ground floor office space, a new 4,325 SF mezzanine office, 17,363 SF Class 8 clean room, and 65,582 SF manufacturing and warehouse. The company manufactures injection molded products for the healthcare industries.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 113,110 SF
SCOPE: New construction
DETAILS:
-
Ground floor office
-
4,325 SF mezzanine
-
17,363 SF Class 8 clean room
-
65,582 SF warehouse and manufacturing




OMNI INDUSTRIAL
Summerville, SC
The OMNI industrial site is home to Spyder Auto regional distribution center and Hood Packaging Corporation. The site was designed to accommodate industrial distribution, factory, or warehouse typologies. We are working on the designs of OMNI III and OMNI IV.
SERVICES: Architecture, Structural Engineering
SIZE: 318,380 SF
SCOPE: New construction
DETAILS:
-
OMNI I Speculative Building:
117,500 SF total building area
26 feet clear -
OMNI II: Spyder Auto Regional Distribution Center:
200,880 SF total building area
32 feet clear -
Load bearing tilt-up concrete exterior walls
-
Design-build project delivery




O'REILLY AUTO PARTS DISTRIBUTION CENTER
Greensboro, NC
Located at the McConnell Industrial site, TDG provided design services for an addition to an existing distribution center.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 202,279 SF
SCOPE: Addition
DETAILS:
-
New addition to existing facility
PENDER COMMERCE PARKL
Wilmington, NC
The Pender Commerce park is an Class A industrial site in Wilmington, North Carolina. TDG provided Architectural and Structural Engineering design services for the site as a whole. The buildings are designed to accommodate flexibility for multiple tenants and a variety of use types.
SERVICES: Architecture
SIZE: 126,000 SF
SCOPE: New construction
DETAILS:
-
Pender Commerce Park Lot 6:
126,000 SF
30' clear height
Tilt-up shell warehouse
Multi-tenant space -
Pender Commerce Park Lot 1: (Coming Soon)
144,900 SF








PALMETTO SPEC
BUILDING
Ladson, SC
Architectural and Structural Engineering design services for a speculative industrial building located in Ladson, South Carolina just outside of Charleston. The building was designed to accommodate multiple tenants.
SERVICES: Architecture, Structural Engineering
SIZE: 196,560 SF
SCOPE: New construction
DETAILS:
-
26' clear height
-
Insulated precast walls
-
Multi-tenant space
PARK AT 74
Winston-Salem, NC
Design services for a speculative 250,000 SF building located in Winston-Salem, North Carolina just outside of Charleston. The building was designed as a Class A industrial park.
SERVICES: Architecture, Civil Engineering Structural Engineering
SIZE: 250,000 SF
SCOPE: New construction
DETAILS:
-
32' clear height
-
Insulated precast walls
-
Multi-tenant space


PORT OF WILMINGTON
Wilmington, NC
Structural Engineering design for the Port of Wilmington cold storage facility.
SERVICES: Structural Engineering
SIZE: 101,537 SF
SCOPE: New construction
DETAILS:
-
40’ warehouse clear height
-
Quick freeze room w/penthouse cooling
-
Central ammonia refrigeration
-
IMP exterior walls
-
Convertible storage room
-
Design-build project delivery








PENSKE LOGISTICS
Romulus, MI
New $98.5 M facility standard freezer/cooler distribution center. The project brought 400 jobs to the region and was made possible through the Michigan Strategic Fund (MSF). The facility allows a major regional grocery chain to provide fresh, frozen and other foods to the local community.
SERVICES: Architecture, Structural Engineering
SIZE: 606,000 SF
SCOPE: New construction
DETAILS:
-
Dry goods, refrigerated & frozen storage
-
Multiple freezer rooms
-
14 banana ripening rooms
-
Insulated precast and IMP walls
-
Cross dock facility w/105 positions
-
Central ammonia refrigeration
-
Design-build project delivery




PRESCIENT
Mebane, NC
Prescient is a digital technology company with advanced manufacturing with highly automated robotics plants. TDG was contracted to provide design services for their new 134,000 SF manufacturing facility in Mebane, North Carolina.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 134,000 SF
SCOPE: New construction
DETAILS:
-
Manufacturing and distribution
-
Laser tagging
-
Welding machines
-
Parts forming
-
Robotics engineering
RESTAURANT DEPOT
Structural Engineering design for various Restaurant Depot locations across the country.
SERVICES: Structural Engineering
SIZE: 60,000 SF
SCOPE: New construction
DETAILS:
-
60,000 SF +/- wholesale distribution
-
20,000 SF +/- parking/loading canopy
-
28’ warehouse clear height
-
Box in a box cooler, freezer & cold dock
-
Rooftop packaged refrigeration
-
Precast or tilt-up concrete exterior walls
-
Design-build project delivery
-
Project locations include:
Wisconsin
Connecticut
(2) Pennsylvania
(2) Virginia
(2) North Carolina
(2) South Carolina
Georgia
(4) Florida








RF MICRO DEVICES
Greensboro, NC
TDG partnered with BE&K Building Group (formerly Suitt Construction), for RF Micro Devices’ 78,695 SF manufacturing and office building in Greensboro, North Carolina. The facility included a Class 10 clean room for wafer production. TDG provided architecture, structural and civil engineering, and coordination of the other design disciplines.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 78,695 SF
SCOPE: New construction
DETAILS:
-
Office and manufacturing
-
Class 10 clean room for water production
SHALAG NONWOVENS
Oxford, NC
TDG provided Architectural, Civil Engineering, and Structural Engineering for the 69,266 SF renovation of Shalag Industries’ existing non-woven fabric facility and new office addition in 2009. In 2010 Triad Design Group provided architectural design for 41,300 SF of Warehouse additions and renovations.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 115,600 SF
SCOPE: New construction
DETAILS:
-
Carded Thermobonded and Air Bonded Materials Manufacturing
-
Phased design and preconstruction
-
Design-build project delivery







SYNTEC, INC.
High Point, NC
Triad Design Group was the Architect, Structural Engineer, and Civil Engineer for the 94,000 SF facility for the manufacture and installation of seats in school buses. The plant contains 89,000 SF of manufacturing and 5,000 SF of office space on a site of 10.85 acres with 121 parking spaces. The building exterior is site-cast concrete panels with a metal expansion walls on two sides. The building is supported by a structural steel frame with a 40’ x 45’ bays with a clear height of 20’.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 94,000 SF
SCOPE: New construction
DETAILS:
-
10.85 acre site
-
Site-cast concrete panel
-
Metal expansion walls
-
Structural steel frame
-
1,800 SF bays
-
20' clear height
SYSCO FOODS
Selma, NC
Civil and Structural Engineering, and interior design services for the 350,000 SF dry goods/ refrigerated/frozen foods distribution center in Selma, NC. The building features are full-service gourmet kitchen, banquet facilities, a corporate and administrative offices.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 361,200 SF
SCOPE: New construction
DETAILS:
-
Dry goods, refrigerated & frozen storage
-
Ice cream room & freezer room
-
Multiple temperature cooler rooms
-
Insulated precast and IMP walls
-
Two story corporate office
-
Test kitchen with dining facilities
-
Central ammonia refrigeration
-
Expandable building design
-
Truck maintenance building w/fueling
-
Design-build project delivery








TRIVANTAGE
Mebane, NC
Design services for TriVantage, an international supplier of all-weather fabrics. TDG provided Architectural, Civil Engineering, and Structural Engineering design services for their distribution facility in Mebane, North Carolina.
SERVICES: Architecture, Civil Engineering, Structural Engineering
SIZE: 102,150 SF
SCOPE: New construction
DETAILS:
-
LEED Silver Certification for new construction
-
Fabric and hardware for awning distribution
UNION CROSS INDUSTRIAL CENTER (UCIC) - Lot #4
Winston-Salem, NC
TDG provided architectural and structural engineering design services for the +/- 144,000 SF shell building located in Winston-Salem, NC.
SERVICES: ARCH | STRUCT
SIZE: 144,122 SF
SCOPE: New construction
DETAILS:
-
Load bearing concrete tilt-wall panels
-
30' clear height






UNIVERSAL FURNITURE
High Point, NC
Architectural design services for a 372,000 SF distribution facility and two-story corporate office.
SERVICES: Architecture
SIZE: 372,000 SF
SCOPE: New construction
DETAILS:
-
2 story corporate office
-
Distribution facility
SERVICES: Architecture
SIZE: 372,000 SF
SCOPE: New construction
DETAILS:
-
2 story corporate office
-
Distribution facility




VF CORPORATION
Greensboro, NC
Architectural, Civil, and Structural design services on the H&M design-build team for the 461,125 SF facility on a 43.62 acre site in Edgefield, South Carolina. The building is insulated pre-cast concrete panels with a single story glass and concrete office of approximately 22,000 SF. The warehouse is approximately 403,000 SF with a 37,629 SF mezzanine. The distribution center has 320 parking spaces, 32 docks and was designed for future expansion.
SERVICES: Architecture
SIZE: 461,000 SF
SCOPE: New construction
DETAILS:
-
Single story office
-
Clothing packing and manufacturing
-
Mezzanines for packing and shipping
-
High bay warehouse distribution space



YOUNGS MILL INDUSTRIAL
Greensboro, NC
Architectural and Structural design services for a new 280,800 warehouse shell building in Greensboro, North Carolina.
SERVICES: Architecture, Structural Engineering
SIZE: 280,800 SF
SCOPE: New construction
DETAILS:
-
30' clear height
-
Tilt-up concrete wall panel
ZIEL-ABEGG, INC.
US HEADQUARTERS
UCIC - Lot #3
Winston-Salem, NC
New state of the art manufacturing shell building and interior upfit with 50,000 +/-SF of office for the German based manufacturing company. The building is currently under construction with completion in 2024.
SERVICES: Architecture, Structural Engineering
SIZE: 522,000 SF
SCOPE: New construction
DETAILS:
-
30' clear height
-
Tilt-up concrete wall panel

